Drastically Reducing the Space Required to be Purged. Available in sizes 1” (25 mm) to 24” (610 mm), PurgElite® reduces argon use and increases weld production. Featuring RootGlo® for perfect pipe positioning and IntaCal® purge gas feed device, welders can be sure to achieve perfect welds along with saving significant amounts of money in both time and inert gas costs.
Tube and Pipe Weld Purging Systems
Pipe Purging Systems
Purging Larger Pipes Fast, Making Huge Savings. For larger diameter pipes, QuickPurge® dramatically reduces the space that needs to be purged, available in sizes 6” (152 mm) to 88” (2,235 mm), with built in PurgeGate® to ensure the dams do not over-inflate. The innovative design of the QuickPurge® System means that zero colour welds will be achieved and there will be no loss of corrosion resistance caused by oxidation.
Heat Resistant Pipe Purging Systems
Fast Purging of Heat-Treated Pipework. With high temperatures often present when welding high strength steel joints, HotPurge® Pipe Purging Systems can be used where the temperature might be as high as 300ºC (572ºF) for lengthy periods. Manufactured in sizes 6 to 88” (150 to 2,235 mm) HotPurge® Systems can be used repeatedly for weld purging and can keep the oxygen levels below 100 parts per million (ppm) throughout the welding cycle,
Weld Purge Dams
Low Cost, Single Ended
Single Ended for where Tandem Systems are Unsuitable. Offering a low cost alternative to foam or cardboard dams, Weld Purge Dams are available in sizes 6 to 88” (150 mm up to 2,235 mm). Weld Purge Dams are manufactured with four pull tags for ease of positioning and retrieval. They are fitted with a dual inflation and purge hose, an additional purge gas hose and an exhaust vent which can be connected to one of the HFT® Weld Purge Monitors®.
Argon Gas Feed Hose
High Quality Argon Feed Hose
Gas Hose for a Variety of Applications and Industries. Tailor made Inert Gas Feed Hoses with leak tight fittings, available for transporting gas at both high and low pressure. The use of a high quality gas welding hose will ensure a leak tight method of feeding non-contaminated gas into the welding zone for weld purging. Conforming to British Standard BS EWN 599 Quality Standard with a temperature range from -30º up to 80ºC.
Unique One Way Valve
Argon Regulator for Pipe Purging Systems. PurgeGate® is a low cost, reusable accessory that has been designed to attach onto any make of Inflatable Pipe Purging System to prevent over-inflation by regulating the pressure and flow of gas that is passed through the system. With an easy push fit connection, the Valve will pass a maximum of 7.5 litres/min and 0.5 bar pressure.
Weld Purging Experts Since 1975
Huntingdon Fusion Techniques HFT® invented the ‘Weld Purge Monitor®’ in 1975 and own all international intellectual property rights and registered trademarks.